The Cargo
Buggy is a testament to our continued
response to the compelling needs within the industry.
It was developed and designed due to numerous requests
to haul heavy equipment to inaccessible areas that
could not be traversed until now.
The purpose of the Cargo Buggy has
been to carry a myriad of equipment spanning from core
drilling rigs to fiber optic cable reels and a multitude
of other uses. The fact that the Cargo
Buggy was designed to be disassembled into three
pieces for easier transporting and shipping magnifies the
achievement.
Model
Number: CB-311855
Gross
Weight:
72,000 lbs.
Net Weight:
50,000 lbs.
Maximum Payload:
22,000 lbs.
Ground
Pressure
1.8 TO 2.15 lbs. per sq. in
Speed
Land:
5.0
M.P.H.
Water:
2.5
M.P.H.
Overall
Dimensions
34' long x 18' wide x 12’ 10” high
Engine
Caterpillar C7 Acert Diesel Engine
300 Horse Power @ 2200 R.P.M.
Tier III Certified, Turbocharged Air to Air After Cooled
Electronic Diagnostics, Logging and Monitor
Flywheel SAE 2, Blower Fan
Instrumentation
Five Gauge Display, Engine Hour Meter, Oil Pressure, Water Temperature, System Voltage, Engine RPM, Fuel Pressure, Warning Lamps / Diagnostics Dual Electric Throttle Control / Williams Controller / Crane and Cab 115 Amp Alternator / 12 Volt System
Hydraulic
Pumps
(2) Sauer Sundstrand Variable displacement pumps
with electric controllers
Hydraulic
Motors and Drive Line
(2) Sauer Sundstrand Variable displacement motors
driven through a planetary speed reducer
Travel
Operation
Steering is accomplished by either stopping one
track and rotating the other or by counter rotating
one track forward and the other in reverse. All
of this is obtained by only two electric control
levers located inside of the operators cab.
Pontoons (2) 31' long x 5' wide x 5' high and
constructed of Cord 10 steel
with five watertight compartments per pontoon
Track
System
(4) Chain strands per side of 4" pitch heavy
duty Marsh Buggy Chain connected to extra heavy
duty forged 3 ” Aluminum Track Cleats with
(3) U.H.M.W. wear pads per side
Features * Disassemble into 3 sections
for ease of transporting and shipping
* Hydrostatic driven track system with braking
capabilities
* Removable forward deck with multiple configurations
available.
* Forward deck dimensions 22’ long x 18’ wide with
22,000 LB payload
Model
Number: CB-402276
Gross
Weight:
155,000 lbs.
Net Weight:
85,000 lbs.
Maximum Payload:
70,000 lbs.
Ground
Pressure
1.5
TO 2.5 lbs. per sq. in.
Speed
Land:
4.0
M.P.H.
Water:
2.0
M.P.H.
Overall
Dimensions
42’8” long
x 22’ wide x 13’ 10”high
Engine
Caterpillar Diesel
Model Number:
C-9
ATAAC Electronic Industrial
Number of Cylinders:
6
Displacement:
537
cubic inches
Horse Power:
335
H.P. @ 2200 RPM
EPA Tier II Certified
Instrumentation
Oil
Pressure Gauge, AMP Gauge, Engine Temperature
Gauge, Hobs Hour Meter, High Temperature and
Low Oil Pressure Shutdown System
Hydraulic
Pumps
(2)
Variable displacement pumps with electric controllers
Hydraulic
Motors and Drive Line
(2) Variable displacement motors driven through
a planetary speed reducer
Travel
Operation
Steering
is accomplished by either stopping one track
and rotating the other or by counter rotating
one track forward and the other in reverse. All
of this is obtained by only two electric control
levers located inside of the operators cab.
Pontoons (2)
40' long x 7' wide x 6' high and constructed
of Cord 10 steel with five watertight
compartments per pontoon
Track
System
(4)
Chain strands per side of 5" pitch heavy
duty Marsh Buggy Chain connected to extra heavy
duty forged 3.5 ” Aluminum Track Cleats
with (3) U.H.M.W. wear pads per side
Features * Disassemble
into 3 sections for ease of transporting and
shipping
* Hydrostatic driven track system with braking
capabilities
* Extra high flotation for extra versatility
and safer water operation
* Four strand track chain, stronger system
and longer track life
Model
Number: CB-431956
Gross
Weight:
120,000 lbs.
Net Weight:
65,000 lbs.
Maximum Payload:
55,000 lbs.
Ground
Pressure
1.8
to 2.0 lbs. per sq. in.
Speed
Land:
2.0
M.P.H.
Water:
.5
M.P.H.
Overall
Dimensions
5’-8”'
long x 19' wide x 14’ high
(Top of Operators Cab)
Pontoons (2) 43' long x 5' wide x 6’ high and
constructed of Cord 10 steel with five watertight
compartments per pontoon
Track
System
(4) Chain strands per side of 4" pitch heavy duty
Marsh Buggy Chain connected to extra heavy duty forged
3 ” Aluminum Track Cleats with (3) U.H.M.W. wear
pads per side
Decking
Deck measures 18’ wide x 33’ long with handrails and expanded metal floor covering
Hydraulic
Motors and Drive Line
(2) Sauer Sundstrand Variable displacement 160 cc motors
driven through a planetary speed reducer
Hydraulic
Tanks, Controls
Durst (3) Port Pump Drive, 200 Gallon Fuel Tank, S.S. Hydraulic
Tank Electric Hydraulic Cooler, Electric Throttle, Electronic
Controllers 7,500 P.S.I. Drive Motor Gauges
Travel
Operation
Steering is accomplished by either stopping one track and
rotating the other or by counter rotating one track forward
and the other in reverse. All of this is obtained
by control levers located inside of the operators cab.
Operators Cab
Aluminum (2) Person Cab with vinyl bench seating and rubber tile floor
Winch
Model D.P. 45, 45,000 Max Line Pull with Fairleads, 40
F.P.M. Line Speed
Two Speed Motor, forward mounted configuration with Rear
Tackle for pulling from rear of machine
Model
Number: CB-312065
Gross
Weight:
86,000 lbs.
Net Weight:
56,000 lbs.
Maximum Payload:
30,000 lbs.
Ground
Pressure
1.8
to 2.15 lbs. per sq. in.
Speed
Land:
4.0
M.P.H.
Water:
2.0
M.P.H.
Overall
Dimensions
34' long x 20' wide x 12’-10” high
Pontoons
(2) 31' long x 6' wide x 5' high and constructed of (Cor-Ten) high tensile alloy steel with five watertight compartments per pontoon
Track
System
(4) Chain strands per side of 4" pitch heavy duty Marsh Buggy Chain connected to extra heavy duty forged 3” Aluminum Track Cleats with (3) U.H.M.W. wear pads per side
Engine
Caterpillar Diesel
Model Number:
CAT C7 Acert
Number of Cylinders:
6
Horse Power
300 H.P. @ 1800-2200 RPM
Hydraulic
Pumps
(2) Sauer Sundstrand Variable displacement pumps with electric controllers
Hydraulic
Motors and Drive Line
(2) Sauer Sundstrand Variable displacement motors driven through a planetary speed reducer
Travel
Operation
Steering is accomplished by either stopping one track and rotating the other or by counter rotating one track forward and the other in reverse. All of this is obtained by only two electric control levers located inside of the operators cab.
Features * Disassemble into two sections for ease of transporting and shipping
* Hydrostatic driven track system with braking capabilities
* Forward deck 22’long x 20’ wide with 30,000 LB payload
2018
Engineers Rd.| Belle Chasse, LA 70037 | PO Box 814 Harvey, LA
70059 | 504.394.5050
